The led light running circuit generally can not adjust the speed of running. Cause dull monotony. Resulting in an idea to build this circuit up. This circuit can adjust the speed of the led light as needed. Makes this circuit can be used more versatile.
Operation of the circuit is divided into two parts: frequency generators. And the display. By the frequency generator IC1 contains a number Ic timer circuit 555 and frequency generator. Defined by the R1, VR1 and C1 will be the output signal at pin 3 of IC1 sent to display section.
In display section consists of IC2, a number CD4017 IC Counter circuit is displayed by the volt at pin 3, 2, 4, 7, 10, 1 and 5, respectively, each pin. The speed depends on the frequency count obtained from pin 14 of IC2, which we can adjust VR1 adjusts the frequency from the frequency generator part.

Image

 

This the circuit light led flashing ,with show of 10 LED. By use integrated number circuit CD4017 perform be Decade Counter/Divider with 10 Decoded Outputs. Which it is integrated digital circuit CMOS then use the power supply about 9VDC. For a signal input continue the circuit can produce general frequency may use IC NE555 all right.

Image

 

I believes in that extremely amateur electronics many you, may ever build the LED flasher or light blinks or the LED Chaser prevent come to already. Today I begs for to advise the circuit LED Chaser, by have LED show 10 amounts together. blink stick bright chase go to continually. By have IC CD4017 circuits precede at drive a tube LED all. Which its work be Counter circuit good just this besides. Still have IC 555 wait for feed Clock with then can fine the speed of the winking with VR1 good easy. The detail is other see in circuit picture better.

 

Image

Advertisements